|
iTRAC 1.2: Run Network
Installation Software on a Workstation
1.
Exit techcenter21 back to the Windows®
desktop.
2.
Disable any file protection software.
3.
Click Start, click Programs,
click techcenter21 (or
LifeCenter21 or BusinessCenter21) and
click Toolbox.
4.
Double-click Network Installation Software
5.
Click NO
to Relay Host. Only the Lab Management Station or Server hosts the relay.
Click Next.
6.
Select the Relay from the list of relays
by clicking on it to highlight it. If
your relay does not appear, make sure it is launched at the LMS and/or click
refresh and wait for the relay to be recognized. Click Next
1. Enter
Station ID/Number and select the Type
2.
Click Finish. You will see several messages about network
tests being conducted.
1. The
AES Real-time Relay will launch and connect, then it
will collapse into the notification area beside the clock. The Relay must be running at all times for
the network connection and real time features to function normally. Once the relay drops down into the system
tray, launch TC, BC or LC and see if network connection has been found.
|