APPLIED EDUCATIONAL SYSTEMS, INC.			Tech Tip # 0182
Client Services		Search Knowledge Base	Downloads		Support Sites	Request Support
iTRAC 2.0: Network Installation Software – Relay Station 1. Click on Start, click Programs, click techcenter21 (or BsuinessCenter21 or LifeCenter21) and click on Toolbox 2. In Toolbox double-click on Network Installation Software. The following screen will appear. 3. Because this station will be hosting the Relay select Yes and click Next 4. Enter a name for the Relay station and then click Next. The following screen will appear: 5. Select the appropriate network folder location, and then click the Browse button to navigate to that folder. Then click Next. The following screen will appear: 6. Enter the number of station in the lab including the Relay station and click Next. The following screen will appear

7. Enter the Relay station’s ID (Typically either 1 or the highest number) and click Next. The following screen will appear:

8. Enter the contact information to the best of your ability and then click Finished. The Network Installation Software will install some files and then the Relay should launch and then minimize. This station should now launch properly.

If you have any problems or questions please feel free to call AES Technical Support.

Network Installation Setup – WorkStation:
	Copyright © 2005 AES, Inc.	back to top